Zinc alloy hinge, middle part and sliding pins in zinc-plated steel. 110° rotation.
Packaging: box of 20 pcs.
Black polyamide friction hinge with hole caps. 115° rotation. Centre-to-centre hole distance 34x34. Symmetrical friction torque 1,1 Nm. Dimensions: 57x50 mm.
Packaging: box of 20 pcs.
Product series: Polyamide hinges
Black polyamide friction hinge with hole caps. 115° rotation. Centre-to-centre hole distance 34x34. Symmetrical friction torque 1,7 Nm. Dimensions: 57x59 mm.
Packaging: box of 20 pcs.
Product series: Polyamide hinges
Cerniera frizionata in lega di zinco verniciata nera. Rotazione 180°. Interassi fori 34x34. Coppia di resistenza 3,4 Nm. Confezione: scatola di cartone da 20 pz.
Product series: Polyamide hinges
Black polyamide hinge with zinc-plated steel pin. 180° rotation.
Packaging: box of 50 pcs.
Product series: Polyamide hinges
Black powder coated zinc alloy hinge. 180° rotation. Provided with 4 screws M5 not mounted.
Packaging: box of 20 pcs.
Product series: Zinc alloy hinges
Black powder coated zinc alloy hinge with stainless steel pin. 180° rotation. Screws M6x8 not included.
Packaging: box of 50 pcs.
Product series: Zinc alloy hinges
Hinge in galvanized steel in 3 pieces jointed between them. 180° rotation. Pins in stainless steel,provided with nuts and washers. Dimensions: 16x18x50.
Packaging: box of 30 pcs.
Product series: Steel hinges
Hinge in high impact strength special technopolymer (on polyamide base) in black colour with mat finish surfaces. Resistant to solvents, oil, greases and other chemical agents. AISI 303 stainless steel rotation pin. Rotation angle: max 220°. Packing: 30 pcs.
Product series: Polyamide hinges
Hinge in high impact strength special technopolymer (on polyamide base) in black colour with mat finish surfaces. Resistant to solvents, oil, greases and other chemical agents. AISI 303 stainless steel rotation pin. Rotation angle: max 210°. Packing: 30 pcs.
Product series: Polyamide hinges
Hinge in high impact strength special technopolymer (on polyamide base), hardened with glass fibre, in black colour with mat finish surfaces. Resistant to solvents, oil, greases and other chemical agents. Rotation pin in technopolymer on acetalic base. Rotation angle: max 335°. Packing: 30 pcs.
Product series: Polyamide hinges
Hinge in high impact strength special technopolymer (on polyamide base) in black colour with mat finish surfaces. Resistant to solvents, oil, greases and other chemical agents. AISI 303 stainless steel rotation pin. Rotation angle: max 180°. Packing: 30 pcs.
Product series: Polyamide hinges
Hinge in high impact strength special technopolymer (on polyamide base) in black colour with mat finish surfaces. Resistant to solvents, oil, greases and other chemical agents. AISI 303 stainless steel rotation pin. Rotation angle: 120°. Packing: 30 pcs.
Product series: Polyamide hinges
Hinge in high impact strength special technopolymer (on polyamide base) in black colour with mat finish surfaces. Resistant to solvents, oil, greases and other chemical agents. AISI 303 stainless steel rotation pin. Rotation angle: max 220°. Packing: 30 pcs.
Product series: Polyamide hinges
Hinge in high impact strength special technopolymer (on polyamide base) hardened with glass fibre, in black colour with mat finish surfaces. Resistant to solvents, oil, greases and other chemical agents. Nickel plated steel rotation stud pin. Through holes for countersunk head screws DIN 7991. Complete with centring inserts, for doweling with 8 or 10 mm. slots. Rotation angle: max 270°. Packing: 20 pcs.
Product series: Polyamide hinges
Hinge in high impact strength special technopolymer (on polyamide base) strengthed with glass fibre, in black colour with mat finish surfaces. Resistant to solvents, oil, greases and other chemical agents. Nickel plated steel rotation stud pins. Through holes for countersunk head screws DIN 7991. Complete with centring inserts, for doweling with 8 or 10 mm. slots. Rotation angle: max 270°. Packing: 20÷50 pcs.
Product series: Polyamide hinges
Hinge in special technopolymer (on polyamide base) hardened with glass fibre, in black colour with mat finish surfaces. Resistant to solvents, oil, reases and other chemical agents. AISI 303 stainless steel rotation pin. The rotation stud pin, fully inserted into the hinge body, cannot be extracted, preventing from any hinge tampering. This characteristic makes the hinge particulary suitable on structures or equipment requiring protection against intrusion. Rotation angle: max 270°. Packing: 20 pcs
Product series: Polyamide hinges
Hinge with adjustable friction. Provided with screw with the possibility to adjust the resistant torque of the door on which it is assembled. Special technopolymer (on polyamide based) reinforced with glass fibers. Black colour. Rotation pin and nut in stainless steel AISI 304. Maximum angle of rotation 180 °. Packing: 30 pcs.
Product series: Polyamide hinges
Hinge in high impact strength special technopolymer (on polyamide base), hardened with glass fibre, in black colour. Resistant to solvents, oil, greases and other chemical agents. AISI 303 stainless steel rotation pin. Rotation angle: max 180°. Available template for scraping paint. Packing: 30 pcs.
Product series: Polyamide hinges
Hinge in high impact strength special technopolymer (on polyamide base), hardened with glass fibre, in black colour with mat finish surfaces. Resistant to solvents, oil, greases and other chemical agents. AISI 303 stainless steel rotation pin. Rotation angle: max 270°. Packing: 30 pcs.
Product series: Polyamide hinges
Hinge in high impact strength special technopolymer (on polyamide base), hardened with glass fibre, in black colour with mat finish surfaces. Resistant to solvents, oil, greases and other chemical agents. AISI 303 stainless steel rotation pin. Rotation angle: max 180°. Packing: 30 pcs.
Product series: Polyamide hinges
Black powder coated zinc alloy hinge. 270° rotation. Right hand and left hand version. Pin in stainless steel. Available with holes for countersunk screws and with threaded studs. Center-to-centre hole/stud distance 25x25. Dimensions: 40x40.
Packaging: box of 20 pcs.
Product series: Zinc alloy hinges
Black powder coated zinc alloy hinge. 270° rotation. Right hand and left hand version. Pin in stainless steel. Available with holes for countersunk screws and with threaded studs. Center-to-centre hole/stud distance 30x30. Dimensions: 50x50
Packaging: box of 20 pcs.
Product series: Zinc alloy hinges
Black powder coated zinc alloy hinge. 270° rotation. Right hand and left hand version. Pin in stainless steel. Available with holes for countersunk screws and with threaded studs. Center-to-centre hole/stud distance 36x36. Dimensions: 60x60
Packaging: box of 20 pcs.
Product series: Zinc alloy hinges
Black powder coated steel flat hinge with friction. 180° rotation. Acetalic resin POM washers. Friction torque 1 Nm +/- 20%. Dimensions: 60x140.
Packaging: box of 20 pcs.
Product series: Steel hinges
Zinc-plated steel, black powder coated steel or stainless steel flat hinge with friction. 180° rotation. Centre-to-centre hole distance 40x40. Both pin and hinge of the same material.
Acetalic resin POM washers. Friction torque 1 Nm +/- 20%.
Packaging: box of 20 pcs.
Product series: Steel hinges
Zinc-plated steel, black powder coated steel or stainless steel flat hinge with friction. 180° rotation. Centre-to-centre hole distance 44x44. Both pin and hinge of the same material. Acetalic resin POM washers. Friction torque 1 Nm +/- 20%.
Packaging: box of 20 pcs.
Product series: Steel hinges
Brushed stainless steel AISI304 flat hinge with friction. 180° rotation. 7mm seal bypass function. Both pin and hinge of the same material. Acetalic resin POM washers. Friction torque 1 Nm +/- 20%. Weight: 400 gr.
Packaging: box of 10 pcs.
Product series: Steel hinges
Spring loaded latch with stud 142 mm with “Turn & Pull” function. Latch stroke 32.5 mm. Dimensions: 40x76 mm.
Packaging: box of 10 pcs.
Hinge in zinc die-casting alloy. Finish surfaces: painted in mat black colour or chromium-plated. Resistant to solvents, oil, greases and other chemical agents. Galvanized steel rotation pin. Suitable for single RH and LH doors. Rotation angle: 180°. Packing: 50 pcs.
Product series: Zinc alloy hinges
Hinge in zinc die-casting alloy. Finish surfaces: painted in mat black colour or chromium-plated. Resistant to solvents, oil, greases and other chemical agents. Galvanized steel rotation pin. Suitable for single RH and LH doors. Rotation angle: 180°. Packing: 50 pcs.
Product series: Zinc alloy hinges
Hinge in zinc die-casting alloy. Finish surfaces: painted in mat black colour. Rotation pin and plate in galvanized steel. Resistant to solvents, oil, greases and other chemical agents. Suitable for RH and LH doors. Rotation angle: max 180°. Screws M6 not included. Packing: 50 pcs.
Product series: Zinc alloy hinges
Hinge in zinc die-casting alloy and aluminium. Finish surfaces: painted in mat black colour. Galvanized steel rotation pin. Resistant to solvents, oil, greases and other chemical agents. Suitable for RH and LH doors. Rotation angle: max 180°. Screws and nuts M6 not included. Packing: 50 pcs.
Product series: Zinc alloy hinges
Hinge in brass and steel. Finish surfaces: painted in mat black colour. Galvanized steel rotation pin and washer in brass. Resistant to solvents, oil, greases and other chemical agents. Available for RH and LH doors. Rotation angle: 220°. Screws and nuts M5 not included. Packing: 50 pcs.
Product series: Brass and steel hinges
Hinge in zinc die-casting alloy. Finish surfaces: painted in mat black colour. Galvanized steel rotation pin. Resistant to solvents, oil, greases and other chemical agents. Suitable for RH and LH doors. Rotation angle: 180°. Screws not included. Packing: 40 pcs.
Product series: Zinc alloy hinges
Hinge in zinc die-casting alloy. Finish surfaces: painted in mat black colour or chromium-plated. Resistant to solvents, oil, greases and other chemical agents. Suitable for RH and LH doors. AISI 303 stainless steel rotation pin. Rotation angle: max 270°. Packing: 50 pcs.
Product series: Zinc alloy hinges
Hinge and rotation pin in black polyamide. Suitable for RH and LH doors. Rotation angle: 180°. Screw and nut not included. Packing: 50 pcs.
Product series: Polyamide hinges
Weld-on hinge in steel. Rotation pin in steel. Suitable for RH and LH doors. Rotation angle 100°. Screw M5 not included. Packing: 50 pcs.
Product series: Steel hinges
Weld-on hinge in steel. Galvanized steel rotation pin. Suitable for RH and LH doors. Rotation angle 120°. Packing: 50 pcs.
Product series: Steel hinges
Weld-on hinge in steel. Galvanized steel rotation pin. Suitable for RH and LH doors. Rotation angle 120°. Packing: 50 pcs.
Product series: Steel hinges
Weld-on hinge in steel. Galvanized steel rotation pin. Suitable for RH and LH doors. Rotation angle 120°. Nuts M6 not included. Packing: 50 pcs.
Product series: Steel hinges
Hinge with pin in galvanized steel. Available for RH and LH doors. Rotation angle 90°. Packing: 50 pcs.
Product series: Steel hinges
Weld-on hinge in steel. Galvanized steel rotation pin. Suitable for RH and LH doors. Rotation angle 135°. Nuts M5 not included. Packing: 50 pcs.
Product series: Steel hinges
Hinge in galvanized steel. Galvanized steel rotation pin. Suitable for RH and LH doors. Rotation angle 120°. Packing: 50 pcs.
Product series: Steel hinges
Weld-on hinge in steel. Galvanized steel rotation pin. Suitable for RH and LH doors. Rotation angle 120°. Screws M4x6 not included. Packing: 50 pcs.
Product series: Steel hinges
Weld-on hinge in steel. Galvanized steel rotation pin. Suitable for RH and LH doors. Rotation angle 90°. Screws M5x8 not included. Packing: 50 pcs.
Product series: Steel hinges
GIUSSANI TECHNIQUES S.p.A.
+39 0362 1907701
+39 0362 1793740
Via Lavoratori Autobianchi, 1
Polo Tecnologico Brianza - Lotto 8
20832 Desio (MB)